# ESC Connector

To keep weight down the flight controller features low profile mezzanine connectors that act as the main PWM and power I/O. All new boards are shipped with a break out board that features an 8 pin JST-SH 1mm pitch connector for PWM 1-4, power in and current in. 

There are various different optional boards that can be purchased depending on application. 

*The standard breakout board:*

Suitable if using external ESC's upto 8s.

*4 Channel ESC - CBU-CM405-FC-ESC-4s4c*

Quadcopters, 4 wheel drive Rovers

*2 Channel ESC - CBU-CM405-FC-ESC-4s2c*

*Fixed wing, Boats, Helicopter, ROV, Standard Rovers*

<figure><img src="/files/GQSakhMjJdEJEwWizh5B" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/4CJMtOkc0nsm7lmrMbW6" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.cbunmanned.com/wiki/products-eol/cbu-cm405-fc-eol/esc-connector.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.